Implant restorations
What Information Should You Send to the Lab for an Implant Crown?
An implant restoration requires more than simply sending a scan or impression. The laboratory needs to correctly identify the case, understand the prescribed restoration and have the information and components required for the selected workflow.
Exact requirements vary by implant system, restoration and clinical workflow. When in doubt, Digidental recommends confirming the case requirements with our team before sending it.
1. Identify the implant system
The laboratory needs to know the implant system being used and the information required to correctly identify the applicable connection.
Digidental works with major implant systems, including Straumann, Nobel Biocare, Neodent, Zimmer and MIS.
If you are unsure about compatibility or the information required, contact Digidental before sending the case.
2. Identify the prescribed restoration
The clinical choice of restoration belongs to the treating professional. Digidental manufactures according to the prescription and requirements provided by that professional.
3. Send the case data
Depending on the workflow, case data may come from an intraoral scan or conventional workflow.
Digidental works with:
- iTero
- 3Shape TRIOS
- Medit
- Carestream / DEXIS
- Dentsply Sirona Primescan
We also accept conventional impressions and physical models.
The required method and data depend on the implant system and restoration.
4. Provide the necessary prescription information
The scan represents case geometry, but it does not replace the prescription.
Depending on the case, the laboratory may require information such as:
- requested restoration;
- site involved;
- implant system;
- requested characteristics or materials, where applicable;
- shade and relevant esthetic requirements;
- special instructions from the treating professional.
Additional information or components may be required depending on the system and workflow.
5. What if you're unsure what to send?
Contact the laboratory before sending the case.
Implant cases can vary considerably depending on the system, connection and prescribed restoration.
Digidental allows dental professionals to speak directly with a technician when technical discussion is required for a complex case.
Does Digidental provide custom abutments?
Yes.
Digidental provides custom abutments as part of its implant-restoration services.
The workflow depends on the implant system, prescription and case requirements.
Does Digidental provide screw-retained and cement-retained restorations?
Yes.
Digidental works with screw-retained and cement-retained implant restorations according to the prescription and requirements of the case.
The treating professional remains responsible for diagnosis, treatment planning and clinical decisions. The laboratory manufactures according to the prescription received.
Why confirm requirements before sending the case?
Confirming requirements in advance can reduce additional exchanges after the case arrives and allows the laboratory to determine more quickly whether the information required for the workflow is present.
For complex cases, this discussion can take place directly with a Digidental technician.
Related resources
Frequently asked questions
Which implant systems does Digidental support?
Digidental works with major implant systems, including Straumann, Nobel Biocare, Neodent, Zimmer and MIS.
Does Digidental provide custom abutments?
Yes.
Can an implant case be sent digitally?
Yes, depending on the system and workflow. Digidental works with several intraoral scanning ecosystems.
Can I discuss the case with a technician before sending it?
Yes. This can be particularly useful for complex cases.
Preparing an implant case?
Contact our team to confirm the information required before sending your case.